*To get the Screed rails to stay in place, there are several methods, two of them are:
- Use concrete nails or screws and punch them through the adjustment screws into the ground. This method allows levelling of the Screed rails.
- Anchor the reinforcement bars/mesh onto the ground and secure the Screed rail onto the reinforcement bars/mesh with steel wires, or similar.
Section distances between the Screed rails are recommended to 2000 – 2500 mm centres, or follow the floor specifications. It is very important that the ground is correctly prepared prior to the pour. The plastic strip will in most cases be left in the floor and it works as a crack allocation guide.